Component Tests and General Diagnostics

MIRROR: OUTER REAR VIEW MIRROR: INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH





Text in Illustration





(a) Check the operation.

(1) Connect the positive (+) lead from the battery to terminal 3 (MV) and the negative (-) lead to terminal 7 (M+), then check that the mirror turns upward.

OK:

Turns upward

If the result is not as specified, replace the outer rear view mirror.

(2) Connect the positive (+) lead from the battery to terminal 7 (M+) and the negative (-) lead to terminal 3 (MV), then check that the mirror turns downward.

OK:

Turns downward

If the result is not as specified, replace the outer rear view mirror.

(3) Connect the positive (+) lead from the battery to terminal 6 (MH) and the negative (-) lead to terminal 7 (M+), then check that the mirror turns left.

OK:

Turns left

If the result is not as specified, replace the outer rear view mirror.

(4) Connect the positive (+) lead from the battery to terminal 7 (M+) and the negative (-) lead to terminal 6 (MH), then check that the mirror turns right.

OK:

Turns right

If the result is not as specified, replace the outer rear view mirror.

(b) Check mirror heater (w/ mirror heater).





Text in Illustration





(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the outer rear view mirror.

2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH





Text in Illustration





(a) Check the operation.

(1) Connect the positive (+) lead from the battery to terminal 3 (MV) and the negative (-) lead to terminal 7 (M+), then check that the mirror turns upward.

OK:

Turns upward

If the result is not as specified, replace the outer rear view mirror.

(2) Connect the positive (+) lead from the battery to terminal 7 (M+) and the negative (-) lead to terminal 3 (MV), then check that the mirror turns downward.

OK:

Turns downward

If the result is not as specified, replace the outer rear view mirror.

(3) Connect the positive (+) lead from the battery to terminal 6 (MH) and the negative (-) lead to terminal 7 (M+), then check that the mirror turns left.

OK:

Turns left

If the result is not as specified, replace the outer rear view mirror.

(4) Connect the positive (+) lead from the battery to terminal 7 (M+) and the negative (-) lead to terminal 6 (MH), then check that the mirror turns right.

OK:

Turns right

If the result is not as specified, replace the outer rear view mirror.

(b) Check mirror heater (w/ mirror heater).





Text in Illustration





(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the outer rear view mirror.