Generator Signal Circuit

LIGHTING: LIGHTING SYSTEM: Generator Signal Circuit
- Generator Signal Circuit

DESCRIPTION

The running light relay assembly receives an engine condition signal via the generator.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK RUNNING LIGHT RELAY ASSEMBLY

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





Text in Illustration





NG -- INSPECT GENERATOR ASSEMBLY

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures

2. INSPECT GENERATOR ASSEMBLY

(a) Inspect generator assembly Testing and Inspection.

NG -- REPLACE GENERATOR ASSEMBLY Removal

OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GENERATOR ASSEMBLY - RUNNING LIGHT RELAY ASSEMBLY)