Cruise Control System

DIAGNOSIS:
- Disconnection or short circuit of speed sensor.

TROUBLE SYMPTOM:
- Cruise control cannot be set. (Cancelled immediately.)




1. CHECK SPEED SIGNAL WITH SELECT MONITOR
- Driving condition: Running at speed greater than 40 km/h (25 MPH)
- Operation of the function keys; F02 ENT

NOTE:
- When there is a failure in the meter cable or the vehicle speed sensor 2, the indicated value of the meter will be incorrect.
- When there is a disconnection or short circuit in the harness between the meter and the cruise control module, the indicated value will be 0 - 1 km/h.




2. PERFORM A CIRCUIT TEST BETWEEN COMBINATION METER AND CRUISE CONTROL UNIT
1. Separate connectors from combination meter and cruise control module.
2. Perform a circuit test in the harnesses.

Connector & terminal / Specified resistance:
(i18) No.8 - (B54) No.18 / 10 Ohm, max.