Test 8Z3

TEST 8Z3: CHECK G SENSOR INPUT VOLTAGE
1) Turn ignition switch to OFF.
2) Remove console box.
3) Disconnect G sensor from body. (Do not disconnect connector.)
4) Turn ignition switch to ON.
5) Measure voltage between G sensor connector terminals.
Connector & terminal: (R70) No. 1 (+) & No. 3 (-)
CHECK: Is file voltage between 4.75 and 5.25 Volts?
YES: Test 8Z4
NO: Repair harness/connector between G sensor and ABS Control Module (ABSCM).