Test 8Z8

TEST 8Z8: CHECK G SENSOR
1) Turn ignition switch to OFF.
2) Remove G sensor from vehicle.
3) Connect connector to G sensor.
4) Connect connector to ABS Control Module (ABSCM).
5) Turn ignition switch to ON.
6) Measure voltage between G sensor connector terminals.
Connector & terminal: (R70) No. 2 (+) & No. 1 (-)
CHECK: Is the voltage between 2.1 and 2.4 Volts when G sensor is horizontal?
YES: Test 8Z9
NO: Replace G sensor.