P0133

O: DTC P0133 - FRONT OXYGEN SENSOR CIRCUIT SLOW RESPONSE

DTC DETECTING CONDITION:
- Two consecutive driving cycles with fault

CAUTION: After repair or replacement of faulty parts, conduct CLEAR MEMORY MODE and INSPECTION MODE. Refer to How To Clear Diagnostic Trouble Codes. Clearing Diagnostic Trouble Codes





WIRING DIAGRAM

10O1: CHECK ANY OTHER DTC ON DISPLAY.

CHECK: Does the Subaru Select Monitor or OBD-II general scan tool indicate DTC P0130?

YES: Inspect DTC P0130 using "10. Diagnostics Chart with Trouble Code". P0130

NOTE: In this case, it is not necessary to inspect DTC P0133.

NO: Go to step 10O2.

10O2: CHECK EXHAUST SYSTEM.

NOTE:
Check the following items.
- Loose installation of front portion of exhaust pipe onto cylinder heads
- Loose connection between front exhaust pipe and front catalytic converter
- Damage of exhaust pipe resulting in a hole.

CHECK: Is there a fault in exhaust system?

YES: Repair exhaust system.

NO: Replace front oxygen sensor.