DTC 76

TROUBLE CODE 76 - DUTY SOLENOID D -





8O1: CHECK RESISTOR.





8O2: CHECK HARNESS CONNECTOR BETWEEN TCM AND DROPPING RESISTOR.





8O3: CHECK HARNESS CONNECTOR BETWEEN TCM AND DROPPING RESISTOR.





8O4: CHECK HARNESS CONNECTOR BETWEEN TRANSMISSION AND DROPPING RESISTOR.





8O5: CHECK HARNESS CONNECTOR BETWEEN TRANSMISSION AND DROPPING RESISTOR.





8O6: CHECK 2-4 BRAKE DUTY SOLENOID GROUND LINE.





8O7: CHECK 2-4 BRAKE DUTY SOLENOID.





8O8: CHECK HARNESS CONNECTOR BETWEEN TCM AND TRANSMISSION.





8O9: CHECK HARNESS CONNECTOR BETWEEN TCM AND CHASSIS GROUND.





8O10: PREPARE SUBARU SELECT MONITOR.





8O11: CHECK OUTPUT SIGNAL EMITTED FROM TCM.





8O12: CHECK OUTPUT SIGNAL EMITTED FROM TCM.





8O13: CHECK OUTPUT SIGNAL EMITTED FROM TCM.





8O14: CHECK OUTPUT SIGNAL EMITTED FROM TCM.





8O15: CHECK OUTPUT SIGNAL EMITTED FROM TCM USING SUBARU SELECT MONITOR.





8O16: CHECK OUTPUT SIGNAL EMITTED FROM TCM USING SUBARU SELECT MONITOR.





8O17: CHECK 2-4 BRAKE DUTY SOLENOID (IN TRANSMISSION).





8O18: CHECK HARNESS CONNECTOR BETWEEN TRANSMISSION AND 2-4 BRAKE DUTY SOLENOID.





8O19: CHECK POOR CONTACT.

DIAGNOSIS:
Output signal circuit of duty solenoid D is open or shorted.

TROUBLE SYMPTOM:
Excessive shift shock.





WIRING DIAGRAM