P0725

DTC DETECTING CONDITION
Two consecutive driving cycles with fault

TROUBLE SYMPTOM
- No lock-up (after engine warm-up)
- AT diagnostic indicator light (AT OIL TEMP indicator light) remains on when vehicle speed is "0".

CAUTION: After repair or replacement of faulty parts, conduct CLEAR MEMORY MODE Ref. to OPERATION, Clear Memory Mode. and INSPECTION MODE Ref. to OPERATION, Inspection Mode.

NOTE: Check engine speed input signal circuit. Ref. to TRANS TROUBLE CODE 11 - ENGINE SPEED SIGNAL -, Diagnostic Procedure with Trouble Code. [1][2]DTC 11