P0700

DTC P0700 TRANSMISSION CONTROL SYSTEM (MIL REQUEST)

1. OUTLINE OF DIAGNOSIS
AT C/U performs CAN communication. It judges as NG if malfunction is detected.





2. ENABLE CONDITIONS

3. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously.

4. DIAGNOSTIC METHOD
It judges as NG in the following condition malfunctions more than the predetermined time (0.5s). It judges as OK if the following condition does not malfunction, and the NG memory is cleared.

Judgement Value





Time needed for diagnosis: 500 m/seconds
Malfunction indicator Light Illumination: Illuminates simultaneously when malfunction is detected.

5. DTC CLEAR CONDITION
- When the OK driving cycle is completed 40 consecutive times.
- When "Clear Memory" was performed.

6. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle is completed 40 consecutive times.
- When "Clear Memory" was performed.

7. FAIL SAFE
None

8. ECU OPERATING AT DTC SETTING
Store freeze frame data. (For test mode $02)

NOTE: For the diagnostic procedure, refer to Transmission Control Systems, Testing and Inspection, Flow of Diagnosis, Basic Diagnostic Procedure, Basic Diagnostic Procedure