P0700

DTC P0700 TRANSMISSION CONTROL SYSTEM (MIL REQUEST)

1. OUTLINE OF DIAGNOSIS
CAN communication is established with AT. Judge as NG when there is a MIL lighting request.




2. ENABLE CONDITIONS

3. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously.




4. DIAGNOSTIC METHOD
Judge as NG when the continuous time when the given conditions are established is longer than the predetermined amount of time (2.5 seconds).
Judge as OK when the given conditions are not established, and clear the NG.

5. DTC CLEAR CONDITION
- When the OK idling cycle is completed 40 times in a row
- When "Clear Memory" is performed

6. MALFUNCTION INDICATOR LIGHT CLEAR CONDITIONS
- When the OK driving cycle is completed 3 times in a row
- When "Clear Memory" is performed

7. FAIL SAFE
None

8. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)

NOTE: For the diagnostic procedure, refer to Transmission Control Systems, Testing and Inspection, Flow of Diagnosis, Basic Diagnostic Procedure: Basic Diagnostic Procedure