Reading Diagnostic Trouble Codes

Read Diagnostic Trouble Code (DTC)

OPERATION

When malfunction of airbag system occurs, the DTC stored in airbag control module will be read out.

1. On the [[Main Menu]], select {Each System Check}.
2. On the [[System Selection Menu]], select {Airbag System}.
3. After {Airbag System} is displayed, select [OK].
4. Select the {Diagnostic Code(s) Display} in [[Airbag System]].
5. Record the DTC displayed.

NOTE:
- For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".
- For details concerning DTCs, refer to "List of Diagnostic Trouble Code (DTC)". Airbag System (Diagnostics)
- If "No diagnostic Code Present" is displayed, the combination meter fault or the open circuit of harness is possible. For the diagnostic procedure, refer to Symptom Related Diagnostic Procedures.
- When the airbag warning light is OFF and "No diagnostic Code Present" is displayed on Subaru Select Monitor, the airbag system is operating properly.