Removal and Replacement
Washer Tank and MotorREMOVAL
1. Open the front hood.
2. Disconnect the ground cable from the battery.
3. Remove the front bumper.
4. Remove the clip of the washer tank duct.
5. Remove the washer motor cover, and disconnect the connector.
6. Disconnect the hose.
7. Remove the bolts and nuts and remove the washer tank.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 6.0 N.m (0.61 kgf.m, 4.4 ft.lb)