Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1. ECM
1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Engine Control System}.
3. Select [OK] after the information of engine type is displayed.
4. On {{Engine Diagnosis}} display, select {Diagnostic Code(s) Display}.
5. On {{Diagnostic Code(s) Display}} display, select {Current DTC} or {Past DTC}.

NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)

2. BODY INTEGRATED UNIT
1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Integ. Unit}.
3. After {Integ. unit} is displayed, select [OK].
4. On {{Integ. unit mode failure diag}} display, select {Diagnostic Code(s) Display}.

NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)