DTC E4

DTC E4 FRONT SENSOR BUS RH COMMUNICATION ERROR

NOTE: Be sure to properly identify the airbag system type prior to performing any diagnostics.

1. TYPE A

DTC DETECTING CONDITION:
- Open or short circuit in harness of front sensor bus (RH).
- Front sub sensor (RH) is faulty.
- Airbag control module is faulty.

CAUTION:
- Before diagnosing the airbag system, be sure to turn the ignition switch to OFF, disconnect the ground cable from battery, and wait approx. 60 seconds or more before starting to work.
- When replacing the airbag module, seat belt pretensioner, roll connector, control module and sensor, reconnect each part and check that the warning light operates properly.
- When inspecting the airbag main harness, disconnect the airbag module connectors and seat belt pretensioners of the driver's and passenger's seats for safety reasons.

WIRING DIAGRAM:










2. TYPE B

NOTE:Refer to DTC A1 for DTC E4. DTC A1