DTC E8

DTC E8 FRONT SENSOR BUS LH COMMUNICATION ERROR

NOTE: Be sure to properly identify the airbag system type prior to performing any diagnostics.

1. TYPE A

DTC DETECTING CONDITION:
- Open or short circuit in harness of front sensor bus (LH).
- Front sub sensor (LH) is faulty.
- Airbag control module is faulty.

CAUTION:
- Before diagnosing the airbag system, be sure to turn the ignition switch to OFF, disconnect the ground cable from battery, and wait approx. 60 seconds or more before starting to work.
- When replacing the airbag module, seat belt pretensioner, roll connector, control module and sensor, reconnect each part and check that the warning light operates properly.
- When inspecting the airbag main harness, disconnect the airbag module connectors and seat belt pretensioner connectors of the driver's and passenger's seats for safety reasons.

WIRING DIAGRAM:










2. TYPE B

NOTE: Refer to DTC E7 for DTC E8. DTC E7