C1542

DTC C1542 CLUTCH ON FAULT

DTC DETECTING CONDITION:
Abnormal clutch signal

TROUBLE SYMPTOM:
Hill start assist does not operate.

NOTE:
Depending on the user clutch operation patterns, the hill start assist warning light may illuminate for a while, and then go off.

Illumination condition:
While the vehicle speed is above 10 km/h (6 MPH), and the clutch switch signal ON (depressed) condition continues five minutes or more, if the vehicle speed lowers below 10 km/h (6 MPH), the module judge as abnormal (clutch switch stuck ON), and then turn on the warning light.

Turning off condition:
If the clutch switch signal OFF (foot released) condition continues for 2 seconds, the module turns off the warning light.
The hill start assist function does not operate, while the warning light illuminates.

WIRING DIAGRAM: