Inspection

General Description

INSPECTION

1. INSPECTION WITHOUT USING CAN DIAGNOSTIC
Before performing diagnostics, check the following item which might affect body integrated unit malfunctions.

1. Measure the battery voltage and check electrolyte.

Standard voltage: 12 V or more

Specific gravity: 1.260 or more

2. Check the fuse condition.
Make sure that ampere of the fuse is setting value, and it is not blown out.
3. Check the connecting condition of harness and harness connector.
4. Confirm key illumination does not blink with ignition switch turned to ON.

2. INSPECTION USING CAN DIAGNOSTIC
Before performing diagnostics, check the following item which might affect body integrated unit malfunctions.

1. Confirm settings of body integrated unit are corresponded to vehicle equipment. Registration Body Integrated Unit
2. Make sure that the User Customizing of the body integrated unit matches the vehicle equipment.
3. Confirm "Factory initial setting" of body integrated unit registrations is set to "Market".