Inspection

General Description

INSPECTION
Before performing diagnostics, check the following item which might affect body integrated unit malfunctions.

1. Measure the battery voltage and check electrolyte.

Standard voltage: 12 V or more
Specific gravity: 1.260 or more

2. Check the fuse condition.
Make sure that ampere of the fuse is setting value, and it is not blown out.
3. Check the connecting condition of harness and harness connector.
4. Confirm settings of body integrated unit are corresponded to vehicle equipment. Programming and Relearning
5. Make sure that the User Customizing of the body integrated unit matches the vehicle equipment. User Customizing
6. Confirm "Factory initial setting" of body integrated unit registrations is set to "Market".
7. Confirm key illumination does not blink with ignition switch turned to ON.