Oil Pressure Sender: Service and Repair

Oil Pressure Switch

REMOVAL

1) Disconnect the ground cable from battery.
2) Lift up the vehicle.
3) Remove the under cover.
4) Drain the engine oil.
5) Disconnect the terminal from oil pressure switch.





6) Remove the oil pressure switch.





INSTALLATION

1) Apply liquid gasket to the oil pressure switch threads.

Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or equivalent





2) Install the oil pressure switch.

Tightening torque:
25 Nm (2.5 kgf-m, 18.4 ft-lb)





3) Connect the terminal of the oil pressure switch.





4) Install the under cover.
5) Refill the engine oil.
6) Check the engine oil level.

INSPECTION

1) Check that the oil pressure switch does not have deformation, cracks or damage.
2) Check the oil pressure switch installation portion for oil leakage and oil seepage.