Electric Parking Brake Switch: Service and Repair
Parking Brake SwitchREMOVAL
PARKING BRAKE SWITCH
1) Remove the instrument panel lower cover.
2) Remove the screws and remove the parking brake switch.
HILL HOLD SWITCH
1) Remove the instrument panel lower cover.
2) Remove the screw and remove the hill hold switch.
INSTALLATION
Install each part in the reverse order of removal.
INSPECTION
PARKING BRAKE CONTROL SWITCH
Check the resistance between parking brake control switch terminals.
NOTE:
Replace the switch if the inspection result is not within the standard value.
HILL HOLD SWITCH
Check the resistance between hill hold switch terminals.
NOTE:
Replace the switch if the inspection result is not within the standard value.