P1500

WIRING DIAGRAM

CIRCUIT DESCRIPTION
Engine start signal is sent from engine starter circuit while engine cranking




DTC DETECTING CONDITION AND TROUBLE AREA

DTC CONFIRMATION PROCEDURE

NOTE: Check to make sure that following conditions are satisfied when using this DTC CONFIRMATION PROCEDURE.

- Intake air temperature: between -14°C and 70°C (6.8°F and 158°F)
- Atmospheric pressure: higher than 560 mm.Hg (Altitude: lower than 2790 m (9150 ft))

1. With ignition switch OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool it any.
3. Start engine and run it for 5 min.
4. Check DTC and pending DTC by using scan tool.




DTC TROUBLESHOOTING (DTC P1500)