P0705
DTC P0705 - TRANSMISSION RANGE SENSOR (SWITCH) CIRCUIT MALFUNCTIONWIRING DIAGRAM
G16/J20 Engines
H25 Engine
DTC DETECTING CONDITION AND TROUBLE AREA
DTC CONFIRMATION PROCEDURE
WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and a tester, on a level road.
1. Connect scan tool to DLC with ignition switch OFF.
2. Clear DTC, pending DTC and freeze frame data in PCM memory by using scan tool and start engine.
3. Shift A/T selector lever to each of L, 2, D, N, R and P ranges for 30 seconds each.
4. Increase vehicle speed to about 70 km/h (45 mph) in D range.
5. Keep driving vehicle speed for 30 seconds.
6. Release accelerator pedal, decrease vehicle speed and stop vehicle.
7. Check pending DTC and DTC.
TROUBLESHOOTING
Steps 1-3
Steps 4-7
Fig. for Step 2.