P0756

DTC P0751 / P0752 / P0756 / P0757: Shift Solenoid Valve-A (#1) / -B (#2) Performance or Stuck OFF / Stuck ON





DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure

WARNING:

- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.

- Road test should be carried out with 2 persons, a driver and a tester, on a level road.

1) Connect scan tool to DLC with ignition switch OFF.

2) Clear DTC, pending DTC and freeze frame data in PCM memory by using scan tool and check fuel level meter indication is 1/4 or more.

3) Start engine, warm it up to normal operating temperature and shift transfer lever to "2H" or "4H" range.

4) Increase vehicle speed with D range, and check that gear position changes from 1st to 2nd, 3rd and 4th in that order as vehicle speed increases, referring to Automatic Gear Shift Diagram and run at each gear position for more than 5 seconds.

5) Stop vehicle and check pending DTC and DTC by using scan tool.





DTC Troubleshooting