P0977
DTC P0977: Shift Solenoid B (#2) Control Circuit HighWiring Diagram:
DTC Detecting Condition and Trouble Area:
DTC Confirmation Procedure
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.
1. Connect scan tool to DLC with ignition switch OFF.
2. Clear DTC, pending DTC and freeze frame data in PCM memory by using scan tool.
3. Start engine and shift transfer lever to "2H" or "4H" range.
4. Shift selector lever in "D" range and keep it for 10 seconds.
5. Drive vehicle about 30 km/h (20 mile/h) with 2nd gear in "D" range for 10 seconds.
6. Increase vehicle speed to about 80 km/h (50 mile/h) with 4th gear in "D" range and keep it for 10 seconds.
7. Release accelerator pedal, decrease vehicle speed and stop vehicle.
8. Check DTC and pending DTC by using scan tool.
Step 1 - 2:
Step 2 (Cont'd) - 3:
DTC Troubleshooting