P0444
DTC P0444: Evaporative Emission Control System Purge Control Valve Circuit OpenWiring Diagram:
DTC Detecting Condition and Trouble Area:
DTC Confirmation Procedure
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.
1. With ignition switch OFF, connect scan tool to DLC.
2. Turn ON ignition switch and clear DTC using scan tool.
3. Start engine and warm it up to normal operating temperature.
4. Drive vehicle in 4000 rpm or less of engine speed for 10 seconds or more.
5. Stop vehicle and check DTC and pending DTC.
Step 1 - 5:
DTC Troubleshooting