P2026

DTC P2026: Evaporative Emission Fuel Vapor Temperature Sensor Circuit Low Voltage

System / Wiring Diagram:

DTC Detecting Condition and Trouble Area:

DTC Confirmation Procedure

NOTE:
Check to make sure that the following conditions are satisfied when using this "DTC Confirmation Procedure".
- Intake air temperature: -14 °C (6.8 °F) or higher
- Atmospheric pressure: higher than 560 mmHg (Altitude: lower than 2790 m (9150 ft))

1. With ignition switch OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool if any.
3. Turn ON ignition switch for 5 sec.
4. Check DTC and pending DTC by using scan tool.

Step 1 - 2:

Step 2 (Cont'd) - 3:

DTC Troubleshooting