P1874
DTC P1874 (No.15): 4WD Low Switch Circuit Malfunction (Short)Wiring Diagram
DTC Detecting Condition and Trouble Area
DTC Detecting Condition and Trouble Area:
DTC Confirmation Procedure
1. Connect scan tool to DLC with ignition switch OFF.
2. Clear DTCs in TCM and ECM memories by using scan tool.
3. Start engine and transfer position switch to 2H or 4H position.
4. Keep engine running at idle speed for 10 seconds or more with select lever D range.
5. Start vehicle and increase vehicle speed to about 60 km/h (37 mile/h) for 2 minutes.
6. Stop vehicle.
7. Check DTC, pending DTC and freeze frame data.
DTC Troubleshooting
