Road Test
Road TestThis test is to check if upshift, downshift and lock-up take place at specified speeds while actually driving vehicle on a level road.
WARNING:
^ Carry out test in very little traffic area to prevent an accident.
^ Test requires 2 persons, a driver and a tester.
1. Warm up engine.
2. With engine running at idle, shift select D.
3. Accelerate vehicle speed by depressing accelerator pedal gradually.
4. While driving in D range, check if gear shift and lock-up occur properly as shown in Automatic Gear Shift Table.
Troubleshooting
Troubleshooting (part 1):
Troubleshooting (part 2):
