P0500
DTC P0500: Vehicle Speed SensorWiring Diagram:
Wiring Diagram
DTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.
1. Connect scan tool to DLC with ignition switch turned OFF.
2. Turn ON ignition switch and clear DTC, pending DTC and freeze frame data by using scan tool and start engine.
3. Increase vehicle speed to 80 km/h (50 mph) or more.
4. Release accelerator pedal and with engine brake applied, keep vehicle coasting for 10 seconds or more and then stop vehicle.
5. Check pending DTC by using scan tool.
Step 1 - 3:
Step 3 (Continued) - 5:
Step 5 (Continued) - 6:
Step 6 (Continued) - 9:
Step 9 (Continued):
DTC Troubleshooting