P2764
DTC P2764 (No.25): Torque Converter Clutch (TCC) Circuit LowWiring Diagram
DTC Detecting Condition and Trouble Area
DTC Detecting Condition and Trouble Area:
DTC Confirmation Procedure
WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and tester, on a level road.
1. Connect scan tool to DLC with ignition switch OFF.
2. Clear DTCs in TCM and ECM memories by using scan tool.
3. Start engine.
4. Keep engine running at idle speed in P range for 20 seconds or more.
5. Check DTC, pending DTC and freeze-frame data.
DTC Troubleshooting
