P0568

DTC P0568: Cruise Control Off Signal / Resume Signal / Set Signal

Wiring Diagram:

Wiring Diagram

DTC Detecting Condition And Trouble Area:

DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure
1. With ignition switch turned OFF, connect scan tool to DLC.
2. Turn ON ignition switch and clear DTC.
3. Start engine and warm up to normal operating temperature.
4. Press cruise main switch once.
5. Drive vehicle at 40 km/h (64 mph) or higher for 3 min. or more.
6. Stop vehicle.
7. Check DTC.

Step 1 - 2:

DTC Troubleshooting