P2135

DTC P2135: Throttle Position Sensor (Main / Sub) Voltage Correction

Wiring Diagram:

Wiring Diagram

DTC Detecting Condition And Trouble Area:

DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure
1. With ignition switch turned OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool if any.
3. Keep the accelerator pedal at idle position for 2 seconds.
4. Keep the accelerator pedal at fully depressed position for 2 seconds.
5. Repeat Step 3) and 4) for 3 times.
6. Check DTC by using scan tool.

Step 1-4:

DTC Troubleshooting