P0108

DTC P0107 / P0108: Manifold Absolute Pressure Sensor Circuit Low / High Input

Wiring Diagram:

Wiring Diagram

DTC Detecting Condition And Trouble Area:

DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure

WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.

1. With ignition switch OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool if any.
3. Run engine at idle speed for 1 minute.
4. Check DTC and pending DTC by using scan tool.

Step 1-3 (Continued):

Step 3 (Continued)-5:

Step 5 (Continued)-6:

DTC Troubleshooting

NOTE: Before this trouble shooting is performed, read the precautions for DTC troubleshooting referring to Precautions for DTC Troubleshooting.