P0616

DTC P0616 / P0617: Starter Relay Circuit Low / High

Wiring Diagram:

Wiring Diagram

Circuit Description
Engine start signal is sent from engine starter circuit while engine cranking.

DTC Detecting Condition And Trouble Area:

DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure

NOTE: Before performing troubleshooting of DTC P0616, make sure that DTC of VSS is not detected.

1. With ignition switch OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool if any.
3. Start engine and run it for 1 minute.
4. Check DTC and pending DTC by using scan tool.

Step 1-3:

DTC Troubleshooting

NOTE: Before this trouble shooting is performed, read the precautions for DTC troubleshooting referring to Precautions for DTC Troubleshooting.