B0058
DTC B0058Diagnostic Instructions
^ Perform the [Diagnostic System Check - Vehicle Diagnostic Information] prior to using this diagnostic procedure.
^ Review [Strategy Based Diagnosis] for an overview of the diagnostic approach. Strategy Based Diagnosis
^ [Diagnostic Procedure Instructions - Vehicle Diagnostic Information] provides an overview of each diagnostic category. Diagnostic Procedure Instructions - Vehicle Diagnostic Information
DTC Descriptor
DTC B0058 00 Passenger Pretensioner Suppressed
Circuit/System Description
The inflatable restraint sensing and diagnostic module (SDM) will set DTC B0058 00 when a pretensioner deployment has been commanded but the passenger seat belt pretensioner is suppressed. The seat belt pretensioner can be suppressed at the request of the passenger presence system.
Conditions for Running the DTC
This DTC is set when a pretensioner deployment has been commanded and the passenger seat belt pretensioner has been suppressed.
Action Taken When the DTC Sets
^ The SDM sets a DTC B0058.
^ The SDM commands ON the AIR BAG warning lamp via serial data communications.
^ DTC B0052, B0053, or B0055 will set along with this DTC.
Reference Information
Schematic Reference
[SIR Schematics]
Connector End View Reference
[SIR Connector End Views]
Description and Operation
[SIR System Description and Operation]
Electrical Information Reference
^ [Circuit Testing]
^ [Connector Repairs]
^ [Testing for Intermittent Conditions and Poor Connections]
^ [Wiring Repairs]
Scan Tool Reference
^ [Scan Tool Data List - SIR]
^ [Scan Tool Data Definitions - SIR]
Circuit/System Verification
1. Verify DTC B0052, B0053, or B0055 is not set.
^ If DTC is set, refer to the [Diagnostic Trouble Code (DTC) List - Vehicle Diagnostic Information].
2. With a scan tool, clear DTCs. Verify DTC B0085 is not set.
^ If DTC is set, replace the SDM.
Repair Instructions
Perform the [Diagnostic Repair Verification - Vehicle Diagnostic Information] after completing the diagnostic procedure. [SIR/SRS Wiring Repairs]