P0012

DTC P0011 / P0012

Wiring Diagram:

DTC Confirmation Procedure

NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Check to make sure that the following condition is satisfied when using this procedure.
- BARO > 75 kPa (0.8 kgf/cm2, 10.8 psi, 0.75 bar)

1. Start engine and warm up to normal operating temperature.
2. Accelerate vehicle to 80 km/h (50 mile/h) or more.

DTC Troubleshooting

Step 1-3:

Step 4-11: