P0441
DTC P0441
Wiring Diagram:
DTC Confirmation Procedure
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.
NOTE: If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
1. Start engine and warm it up to normal operating temperature.
2. Drive vehicle at 50 - 100 km/h (30 - 60 mile/h) for 1 min.
DTC Troubleshooting
