Operation CHARM: Car repair manuals for everyone.

P2097

DTC P2096 / P2097

System and Wiring Diagram

Wiring Diagram:




Wiring Diagram:











DTC Confirmation Procedure

WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out by 2 persons, a driver and a tester, on a level road.


NOTE: If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.

1. Start engine and warm up to normal operating temperature.
2. Drive vehicle at 60 km/h (40 mile/h) or higher for 4 min.

DTC Troubleshooting

Step 1-3:




Step 4-8:




Step 9-13: