P0008
DTC P0008 / P0009NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank.
DTC Confirmation Procedure
NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Make sure that the following conditions are satisfied when using this procedure.
- -10 °C (14 °F) < ECT < 110.3 °C (230.5 °F)
1. Start engine and warm up to normal operating temperature.
2. Run engine at idle speed for 3 min.
DTC Troubleshooting
