P0135

DTC P0135 / P0141 / P0155 / P0161

NOTE: For identification of each cylinder and bank, refer to Precaution for Identification of Cylinder and Bank.

Wiring Diagram:

DTC Confirmation Procedure

NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Make sure that the following conditions are satisfied when using this procedure.
- -10.7 V < Battery voltage < 18.1 V
- ECT at engine starting < 30 °C (86 °F)

1. Start engine.
2. Accelerate vehicle from 0 km/h (0 mile/h) to 56 km/h (35 mile/h).
3. Keep vehicle'speed at 56 km/h (35 mile/h) for 10 sec.
4. Stop vehicle and run engine at idle speed for 10 sec.
5. Repeat step 2) through 4) 5 times.

DTC Troubleshooting

Step 1-3: