P2235
DTC P2232 / P2235
Wiring Diagram:
DTC Confirmation Procedure
NOTE:
Make sure that the following conditions are satisfied when using this procedure.
- Battery voltage > 10.5 V
1. Start engine and warm up to normal operating temperature.
2. Drive vehicle at 60 - 80 km/h (37 - 50 mile/h) for 3 min. or more. (Keep throttle valve opening constantly and keep engine speed at 2,500 rpm or less in this step.)
3. Run engine at idle speed for 1 min.
DTC Troubleshooting
