Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki Truck >> 2009 >> Grand Vitara 2WD V6-3.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Programming and Relearning >> Registered VIN (Vehicle Identification Number) Data Check

Registered VIN (Vehicle Identification Number) Data Check

Registered VIN Data Check

1. Connect SUZUKI scan tool to data link connector (DLC) (1) located on underside of instrument panel at driver's seat side.

Special Tool
(A): SUZUKI scan tool (SUZUKI-SDT)







2. Turn ignition switch to ON position.
3. Select VIN registration mode of SUZUKI scan tool.
4. Confirm whether code of 17 digits displayed on SUZUKI scan tool is corresponding to VIN shown on the left side of instrument panel. If displayed VIN does not correspond to instrument panel VIN, register VIN (vehicle identification number) data into ECM referring to VIN Registration:N32A.
5. Push "EXIT" button of SUZUKI scan tool.
pro multis · About Operation CHARM