Headlight Leveling Actuator Inspection (If Equipped)

Headlight Leveling Actuator Inspection (If Equipped)

1. Make sure all couplers of headlight and leveling actuator are connected securely.
2. Park vehicle in front of blank wall (screen).
3. Turn ignition switch to ON position.
4. Perform Headlight Auto Leveling Warning Light Check (If Equipped).
5. Connect service wire (2) to terminals of diagnosis connector (1).
6. Perform Steps a) through c) described below within 20 seconds after Step 5).
a. Turn lighting switch (3) to "HEAD" position and then turn lighting switch to OFF position.
b. Repeat Step a) 2 times.
c. Turn lighting switch (3) to "HEAD" position.







7. Check that optical axes of headlights reflected on blank wall (screen) change. If not, go to Headlight Auto Leveling System Symptom Diagnosis (If Equipped). Headlight Auto Leveling System Symptom Diagnosis (If Equipped)