P0501
DTC P0500 / P0501
Wiring Diagram:
DTC Confirmation Procedure
P0500
NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Check to make sure that the following conditions are satisfied when using this procedure.
- 10 V < Battery voltage < 18 V
1. Start engine and warm up to normal operating temperature.
2. Drive vehicle at 60 - 80 km/h (37 - 50 mile/h) or more for 1 min. or more.
3. Release accelerator pedal, and keep vehicle coasting for 10 sec. with engine braking applied. (fuel cut condition)
P0501
NOTE: If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
1. Start engine.
2. Drive vehicle at 56 km/h (35 mile/h) or more for 1 min.
DTC Troubleshooting
