Center Console

Center Console: Removal and Installation

Center Console










Removal

1) Remove instrument lower panel RH and lower glove box assembly. Refer to [Instrument Lower Panel RH and Glove Box: Removal and Installation] Instrument Lower Panel RH and Glove Box.
2) Remove the cup holder finisher.
3) Remove A/T or M/T finisher, depending upon how equipped. Refer to [A/T Finisher: Removal and Installation] A/T Finisher (A/T) or [M/T Finisher: Removal and Installation] M/T Finisher (M/T).
4) Remove center console screws, then lift center console rear base away from center console front base while disconnecting harness connectors.
5) Disconnect remaining harness connectors, then remove center console front base.

Installation

Installation is in the reverse order of removal.