P0108

DTC P0108 MANIFOLD ABSOLUTE PRESSURE (MAP) CIRCUIT HIGH INPUT





WIRING DIAGRAM

CIRCUIT DESCRIPTION
This sensor senses pressure change in the intake manifold and converts it into voltage change. It consists of a semi-conductor type pressure converting element which converts a pressure change into an electrical change and an integrated circuit which amplifies and corrects the electric change.
The ECM sends a 5-volt reference voltage to the pressure sensor. As the manifold pressure changes, the electrical resistance of the sensor also changes.
By monitoring the sensor output voltage, ECM knows the manifold pressure (intake air volume).
ECM uses the voltage signal from the pressure sensor as one of the signals to control various devices.





DETECTING CONDITION

NOTE: When DTC P0108, P0113, P0118, P0123 and/or P0450 are indicated together, it is possible that "G/R" circuit is open.

DTC CONFIRMATION PROCEDURE
1) Clear DTC, start engine and keep it at idle for 1 min.
2) Select "DTC" mode on scan tool and check DTC.











INSPECTION