P0134

Wiring Diagram:

Detecting Condition / Trouble Area:

DTC CONFIRMATION PROCEDURE

WARNING:
- When performing a road test, selects place where there is no traffic or possibility of a traffic accident and very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 person, a driver and tester, on a level road.

NOTE:
Check to make sure that the following conditions are satisfied when using this DTC CONFIRMATION PROCEDURE.
- Intake air temp.: between -14 °C and 70 °C (6.8 °F and 158 °F)
- Altitude (barometric pressure): 2400 m, 8000 ft or less (560 mmHg, 75 kPa or more)
- Fuel level indication on meter cluster: 114 or more (For 1999 MY)

1. Perform step 1. to 6. of DTC P0131/P0132 confirmation procedure.
2. Check if DTC and pending DTC exists by using scan tool. If not, check if oxygen sensor monitoring test has completed by using scan tool. If not in both of above checks (i.e., no DTC and pending DTC and oxygen sensor monitoring test not completed), check vehicle condition (environmental) and repeat step 3. through 6. of DTC P0131 1/P01 32 confirmation procedure.

Trobleshooting (Steps 1 - 5):