P0171

Detecting Condition / Trouble Area:

DTC CONFIRMATION PROCEDURE

WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 person, a driver and tester, on a level road.

NOTE:
Check to make sure that the following conditions are satisfied when using the DTC CONFIRMATION PROCEDURE.
- Intake air temperature: between -10 °C and 60 °C (14 °F and 140 °F)
- Altitude (barometric pressure): 2400 m, 8000 ft or less (560 mmHg, 75 kPa or more)
- Fuel level indication on meter cluster: 1/4 or more (For 1999 MY)

1. With ignition switch OFF connect scan tool.
2. Turn ON ignition switch and clear DTC using scan tool.
3. Start engine and warm up to normal operating temperature.
4. Operate vehicle within freeze frame data condition as noted for 5 min.
5. Stop vehicle and check DTC and pending DTC.

Troubleshooting (Steps 1 - 5):

Troubleshooting (Steps 6 - 9):