P0500

DTC P0500 VEHICLE SPEED SENSOR (VSS) MALFUNCTION FOR M/T VEHICLE





WIRING DIAGRAM





DETECTING CONDITION

DTC CONFIRMATION PROCEDURE

WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester.

1) Clear DTC and warm up engine to normal operating temperature.
2) Increase vehicle speed to 50mph, 80km/h in 3rd gear.
3) Release accelerator pedal and with engine brake applied, keep vehicle coasting (fuel cut condition) for 4 sec. or more.
4) Check pending DTC and DTC.

Testing Procedure:

Fig. 1:

Fig. 2:

INSPECTION