P1410

DTC P1410 FUEL TANK PRESSURE CONTROL SYSTEM MALFUNCTION





WIRING DIAGRAM





DETECTING CONDITION

DTC CONFIRMATION PROCEDURE
When fuel level meter indicates 3/4 or more, perform the following procedure.
When it indicates lower than 3/4, go to Step 2 (system circuit inspection) in DTC P1410 Diag. Flow Table.
1) Turn ignition switch OFF.
2) Clear DTC with ignition switch ON.
3) Start engine and vehicle stops.
4) Check pending DTC in "ON BOARD TEST" or "PENDING DTC" mode and DTC in "DTC" mode.

Testing Procedure:

Fig. 1:

Fig. 2:

Fig. 3:

INSPECTION